Search

Whiteboard Panels: A White Surface That Shows Every Contact

PRODUCT DETAILS

A whiteboard is a white coated panel, sometimes with an aluminium frame, and its whole value is the surface. Any contact that is not perfectly clean leaves a mark on white, and the edge is where the coating is most easily chipped away from the substrate.

Why white is the difficult colour

Dust, board fibre and handling marks all show. A protector that would be invisible against kraft cartons is obvious against a white panel.

The edge is a cut or a fold in the coating, and once the coating lifts at the edge the board will not clean properly along that line.

Specification at a glance

Panel thickness sets the inside width; where the board is framed, the channel sits on the frame, and where it is unframed, on the panel edge with a clean face.

BoardProtectionNote
FramedChannel on frameNot on white face
UnframedChannel on panelClean board
Wiped before packFit after wipingDust to edge
BundleCut openNo fibre
Edge coatingCover the cutCoating lifts

Framed and unframed boards

Framed boards are protected by the frame, so the protector should sit on the aluminium rather than over the white face, or it will press the coating at the edge.

Unframed boards need the protector directly on the panel, and the board must be clean, because a single fibre trapped under kraft leaves a mark under the stack weight.

Cleaning, dust and the packing bench

White panels are usually wiped before packing, and the protector should go on after the wipe rather than before. Fitting first and wiping second pushes dust to the edge, which is exactly where it marks.

Keep the boards in a closed bundle until dispatch, and cut the bundle open rather than tearing it, so no fibre lands on the face.

Where whiteboards are packed with accessories, keep the pen tray and the fixings away from the panel face. A fixing bag resting on white board for a week in a warm container leaves a print that no cleaner removes.

Questions buyers ask before ordering

Why is white harder to protect?
Every mark and every fibre shows, and the coating is easily chipped at the edge.

Frame or panel?
On the frame where there is one, so the white face is not pressed.

When should protection be fitted?
After the panel is wiped, not before.

How should bundles be opened?
Cut, not torn, so no fibre lands on the face.

What happens if the coating lifts?
The board will not clean properly along that line.

For a quotation, post the panel size, the band positions and the destination port to mona@hengnicepacking.com.

Inquire Now

If you have any questions or needs about the product, please fill in the following form and we will contact you as soon as possible.

+8615653268176