Exhibition wall panels are reused, handled by crews who are paid to be fast, and judged by how they look under stand lighting. The panel that arrives with a marked edge is the panel that gets hidden behind a graphic, and that decision is made on site, not in the factory.
Reuse changes the specification
A one-trip pack can accept a protector that is destroyed on opening. An exhibition panel may travel twenty times, so the protector has to come off cleanly and the panel edge has to survive the cycle.
That usually means a simple channel with no adhesive, removed before the panel goes on the wall, rather than anything taped in place.
Specification at a glance
Panel thickness sets the inside width; a light wall is enough for a light panel, and a wide leg protects the face that lighting will expose.
| Stage | Protection | Note |
|---|
| Crate | Channel on edges | Reused trips |
| Trolley | Corner protection | Moved per show |
| Printed face | Clean or coated kraft | Lighting shows scuffs |
| On site | Remove cleanly | No adhesive |
| Bundle | Label by wall | Less unpacking |
Printed faces and lighting
Stand lighting is unforgiving: it rakes across a face and shows every scuff. A wide leg protects more of the face, which is where the cosmetic risk sits.
Where panels are printed, the print itself is the product, so the board in contact with it has to be clean and, ideally, coated.
Crates, trolleys and the show floor
Exhibition panels usually travel in crates or on trolleys, and are moved several times per show. Protection has to survive being taken off and put back on, which rules out anything single-use.
Label the bundle by wall so the crew can find the panel without unpacking everything, because unpacking on the show floor is where most damage happens.
Keep a small number of spare channels in the crate. Crews lose them, and a panel refitted without protection for the return journey is the one that arrives damaged at the next show.
Questions buyers ask before ordering
Why is reuse the key factor?
Exhibition panels travel many times, so protection has to come off cleanly and go back on.
Adhesive or plain channel?
Plain channel, because adhesive leaves residue on a face that has to look new.
Does a wide leg matter?
Yes, stand lighting rakes across the face and shows scuffs.
What face for printed panels?
Clean or coated kraft, because the print is the product.
How do you reduce site damage?
Label bundles by wall so crews do not unpack everything on the floor.
Send the panel thickness, the edge condition and the pack weight to mona@hengnicepacking.com and we will quote the U profile that fits.