Search

Skirting Boards: A Long Thin Profile With a Finished Face

PRODUCT DETAILS

Skirting is a long, thin moulding with a finished face and at least one profiled edge. It is light, it bends easily over a span, and the face that will be painted or lacquered is exactly the face that a band or a pallet rail will mark. A U channel at the band positions covers the edge and both faces in one fit.

What damages skirting in a pack

Three things, in order of frequency: bowing from poor support, band marks on the finished face, and chipped profile edges where boards touch. The first is a packing problem, the other two are edge protection problems.

Because the boards are thin, a band tensioned on the edge deforms the profile rather than cutting it, and the deformation stays after the band is cut.

Specification at a glance

The board thickness sets the inside width, and short pieces at the band positions do most of the work. A full-length channel is only needed where the pack must be held straight.

PositionProtectionNote
Band positionShort U channelFace marks
Cut endsShort protectorHandling
Bottom bundleStrip along deck edgeDeck contact
Pre-finishedCoated kraftSurface quality
Long spanSupport, not boardBowing

Bundles, corners and the cut ends

Skirting is usually bundled with the profile ends exposed, and those ends are what gets knocked. Short protectors at both ends are cheap insurance.

Where bundles are stacked, the bottom bundle carries the weight and its face takes the deck contact, so a strip along the bottom edge is worth more than extra wall thickness everywhere.

Finish, print and the site handover

Primed and coated skirting shows handling marks, so the board in contact with the face has to be clean. A coated kraft face is the usual specification where the goods are pre-finished.

Protectors usually stay on until the fitter takes the bundle to the room, so they have to survive being reopened more than once.

Questions buyers ask before ordering

Why protect skirting edges?
The finished face and the profile edge are what mark, and a mark on pre-finished skirting is a rejection.

Full length or short pieces?
Short pieces at bands and ends, unless the bundle needs holding straight.

Does a protector stop bowing?
No, that is support spacing in the bundle.

What face for primed skirting?
A clean or coated kraft face, because the surface is the product.

Will it survive reopening?
A simple channel does; anything taped or wrapped usually does not.

Send the panel thickness, the edge condition and the pack weight to mona@hengnicepacking.com and we will quote the U profile that fits.

Inquire Now

If you have any questions or needs about the product, please fill in the following form and we will contact you as soon as possible.

+8615653268176