Leg length is the distance from the fold to the outer edge of the profile, measured along the face. It is the dimension that decides whether a protector lies flat on the pack or tips off it, and it is the one buyers most often choose by eye.
What a long leg does, and what it costs
A long leg spreads band pressure over more of the face, which reduces marking and spreads load. It also bridges anything raised on that face: hardware, a recess, a pallet overhang, the lip of a lid.
Where the leg bridges, the profile creases at the bridge and lifts at the contact points. That lift is what lets a protector slide off during handling.
Specification at a glance
The working rule is the longest leg that still lies flat. Not the longest available, and not the shortest that covers the corner.
| Face | Leg | Note |
|---|
| Flat, no fittings | Long leg | Maximum spread |
| Hardware on face | Short of the hardware | Avoid bridging |
| Band near edge | Short leg | No edge load |
| Two finished faces | Equal legs | Fitted either way |
| Deep recess | Long, notched | Bridge with slot |
Equal and unequal legs
Equal legs are the default because they can be fitted either way round, which matters when a packing line is fitting thousands a day. Unequal legs suit a pack with one finished face and one hidden face.
Legs beyond about 100 mm stop being a protector and start being a panel, with a different cost and freight profile.
Measuring on a real pack
Measure the face from the edge to the first thing that would lift the board, and take that as the maximum. Then check the band position, because a leg that ends under the band concentrates load at its edge.
If the band sits near the edge of the face, a short leg is often better than a long one that ends exactly under the band.
Questions buyers ask before ordering
How is leg length measured?
From the fold to the outer edge, along the face.
Longer always better?
No. A leg that bridges a fitting creases and lifts off, which is worse than a shorter leg that sits flat.
What if the band is near the edge?
A short leg avoids ending exactly under the band, where load concentrates.
Can legs differ?
Yes, unequal legs suit a pack with one finished face.
Is there a maximum?
Around 100 mm, beyond which it behaves as a panel rather than a protector.
Share the drawing or the pack photo with mona@hengnicepacking.com and we will confirm feasibility before quoting.