Search

Edge Board: One Product, Six Names, and How to Specify It

PRODUCT DETAILS

Edge board, angle board, corner board, edge protector, edge guard and V board are the same product under different names, and the name usually tells you which market the buyer learned the trade in. That matters when a specification arrives by email, because a drawing can describe an edge board and a text line can ask for corner boards, and both are correct.

Which name where

Edge board and edge protector are the common terms in the United Kingdom and Australia. Angle board and corner board are more common in North America, and V board is used where the emphasis is on the folded section rather than the job it does.

None of these names carries a dimension, which is why an order cannot be placed from a name alone. The name identifies the family; four numbers identify the part.

Specification at a glance

Every name resolves to the same four numbers: two legs, a wall and a length. Once those are fixed the naming question stops mattering.

NameCommon inNote
Edge boardUK, AustraliaPaper or plastic
Angle boardNorth AmericaSame product
Corner boardRetail and furnitureCorner focus
Edge protectorGeneral tradeBroadest term
V boardSection focusDescribes the fold

Why the confusion costs money

A buyer asks for corner boards and receives angle board, and both are right. A buyer asks for edge board and expects a plastic extrusion, and the paper version arrives. The second case is the expensive one, and it is solved by saying paper or paperboard in the first line.

The same applies to thickness: some markets quote the wall in millimetres, others in thousandths of an inch, and a 4 mm wall is not the same as a 0.15 inch wall.

Writing a line that cannot be misread

A specification line that works in every market reads: paper edge board, leg A by leg B, wall thickness, length, quantity, and the band or load it has to survive.

Adding the load is what turns a name into a specification, because it lets the supplier tell you whether the wall you asked for is the wall you need.

Questions buyers ask before ordering

Is edge board the same as angle board?
Yes. The names differ by market, the product is the same.

Which name should I use?
Add paper or paperboard to whichever name you use, so nobody quotes a plastic extrusion.

Why do names cause errors?
Because no name carries a dimension, and some buyers read edge board as a plastic profile.

What four numbers do I need?
Two legs, a wall thickness and a length. Everything else follows.

Does thickness get quoted differently?
Yes, millimetres or thousandths of an inch, and the two are not interchangeable.

For a quotation, post the product size, the band positions and the destination port to mona@hengnicepacking.com.

Inquire Now

If you have any questions or needs about the product, please fill in the following form and we will contact you as soon as possible.

+8615653268176